 |
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
| Datasheet File OCR Text: |
| Ordering number : ENN7753 FTD8004 FTD8004 Features * * * * N-Channel Silicon MOSFET General-Purpose Switching Device Applications Low ON-resistance. 2.5V drive. Mounting height 1.1mm. Best suited for switching of lithium-ion battery with drain common. Specifications Absolute Maximum Ratings at Ta=25C Parameter Drain-to-Source Voltage Gate-to-Source Voltage Drain Current (DC) Drain Current (Pulse) Allowable Power Dissipation Total Dissipation Channel Temperature Storage Temperature Symbol VDSS VGSS ID IDP PD PT Tch Tstg PW10s, duty cycle1% Mounted on a ceramic board (1000mm2!0.8mm)1unit Mounted on a ceramic board (1000mm2!0.8mm) Conditions Ratings 20 12 8 40 1.4 1.45 150 --55 to +150 Unit V V A A W W C C Electrical Characteristics at Ta=25C Parameter Drain-to-Source Breakdown Voltage Zero-Gate Voltage Drain Current Gate-to-Source Leakage Current Cutoff Voltage Forward Transfer Admittance Symbol V(BR)DSS IDSS IGSS VGS(off) yfs RDS(on)1 RDS(on)2 RDS(on)3 RDS(on)4 Conditions ID=1mA, VGS=0 VDS=20V, VGS=0 VGS= 8V, VDS=0 VDS=10V, ID=1mA VDS=10V, ID=8A ID=8A, VGS=4.5V ID=6A, VGS=4V ID=4A, VGS=3.1V ID=4A, VGS=2.5V Ratings min 20 1 10 0.5 12 6 7 8 9 20 12 13 14 16 16 18 20 23 1.3 typ max Unit V A A V S m m m m Static Drain-to-Source On-State Resistance Marking : D8004 Continued on next page. Any and all SANYO products described or contained herein do not have specifications that can handle applications that require extremely high levels of reliability, such as life-support systems, aircraft's control systems, or other applications whose failure can be reasonably expected to result in serious physical and/or material damage. Consult with your SANYO representative nearest you before using any SANYO products described or contained herein in such applications. SANYO assumes no responsibility for equipment failures that result from using products at values that exceed, even momentarily, rated values (such as maximum ratings, operating condition ranges, or other parameters) listed in products specifications of any and all SANYO products described or contained herein. SANYO Electric Co.,Ltd. Semiconductor Company TOKYO OFFICE Tokyo Bldg., 1-10, 1 Chome, Ueno, Taito-ku, TOKYO, 110-8534 JAPAN 73004PA TS IM TA-100773 No.7753-1/4 FTD8004 Continued from preceding page. Parameter Input Capacitance Output Capacitance Reverse Transfer Capacitance Turn-ON Delay Time Rise Time Turn-OFF Delay Time Fall Time Total Gate Charge Gate-to-Source Charge Gate-to-Drain "Miller" Charge Diode Forward Voltage Symbol Ciss Coss Crss td(on) tr td(off) tf Qg Qgs Qgd VSD Conditions VDS=10V, f=1MHz VDS=10V, f=1MHz VDS=10V, f=1MHz See specified Test Circuit. See specified Test Circuit. See specified Test Circuit. See specified Test Circuit. VDS=10V, VGS=4V, ID=8A VDS=10V, VGS=4V, ID=8A VDS=10V, VGS=4V, ID=8A IS=8A, VGS=0 Ratings min typ 2400 445 435 30 360 165 240 28 3.5 10 0.82 1.2 max Unit pF pF pF ns ns ns ns nC nC nC V Package Dimensions unit : mm 2231 0.65 8 0.95 3.0 5 0.425 0.5 1 0.25 4 (0.95) 0.125 1 : Drain 2 : Source1 3 : Source1 4 : Gate1 5 : Gate2 6 : Source2 7 : Source2 8 : Drain SANYO : TSSOP8 Switching Time Test Circuit VDD=10V 0.1 1.0 4.5 6.4 Electrical Connection VIN 4V 0V VIN D S2 S2 G2 ID=8A RL=12.5 D PW=10s D.C.1% VOUT G D S1 S1 G1 FTD8004 P.G 50 S No.7753-2/4 FTD8004 8 ID -- VDS 3.0 V 2.5 V 12 ID -- VGS VDS=10V 2.0 7 6 5 4 3 2 1 V Drain Current, ID -- A 4.0 V 10 Drain Current, ID -- A 4.5V 1. 5V 8 6 4 Ta= 75C 25C 0 0.2 2 VGS=1.0V 0 0 0.05 0.10 0.15 0.20 0.25 0.30 0.35 0.40 0 0.4 0.6 0.8 1.0 1.2 1.4 1.6 1.8 2.0 Drain-to-Source Voltage, VDS -- V 50 IT07082 35 RDS(on) -- VGS Gate-to-Source Voltage, VGS -- V --25 C IT07083 RDS(on) -- Ta Static Drain-to-Source On-State Resistance, RDS(on) -- m Static Drain-to-Source On-State Resistance, RDS(on) -- m 45 40 ID=8A 6A 4A Ta=25C 30 35 30 25 20 15 10 5 0 0 2 4 6 8 10 12 IT07084 25 20 15 =3.1 VGS 4A, I D= 2.5V S= 4A, VG I D= V 10 =4V VGS =4.5V =6A, A, V GS ID I D=8 5 0 --75 --50 --25 0 25 50 75 100 125 150 175 Gate-to-Source Voltage, VGS -- V 5 yfs -- ID Ambient Temperature, Ta -- C 10 7 5 3 2 1.0 7 5 3 2 0.1 7 5 3 2 IT07085 IF -- VSD VGS=0 Forward Transfer Admittance, yfs -- S 3 2 10 7 5 3 2 1.0 7 5 3 2 0.1 0.01 VDS=10V 25 C 2 3 5 7 0.1 2 3 5 7 1.0 2 3 Drain Current, ID -- A 3 2 5 7 10 IT07086 0.01 0.2 0.3 0.4 0.5 5C 25 C --25 C 0.6 0.7 Ta= 7 C -25 =C Ta 75 Forward Current, IF -- A 0.8 0.9 1.0 1.1 SW Time -- ID VDD=10V VGS=4V 10000 7 5 Ciss, Coss, Crss -- VDS f=1MHz Diode Forward Voltage, VSD -- V IT07087 Switching Time, SW Time -- ns 1000 5 3 2 100 7 5 3 2 10 0.01 td (off) tf Ciss, Coss, Crss -- pF 7 3 2 Ciss 1000 7 5 3 2 tr Coss Crss td(on) 100 2 3 5 7 0.1 2 3 5 7 1.0 2 3 5 7 10 IT07088 0 2 4 6 8 10 12 14 16 18 20 Drain Current, ID -- A Drain-to-Source Voltage, VDS -- V IT07089 No.7753-3/4 FTD8004 4.0 3.5 3.0 2.5 2.0 1.5 1.0 0.5 0 0 5 10 15 20 25 30 IT07090 VGS -- Qg VDS=10V ID=8A Gate-to-Source Voltage, VGS -- V 100 7 5 3 2 ASO IDP=40A <10s 10 0 s 1m s Drain Current, ID -- A 10 7 5 3 2 1.0 7 5 3 2 0.1 7 5 3 2 ID=8A 10 m 10 Operation in this area is limited by RDS(on). s 0m s 0.01 0.01 DC operation (Ta=25C) Ta=25C Single pulse Mounted on a ceramic board (1000mm2!0.8mm) 1unit 23 5 7 0.1 23 5 7 1.0 23 5 7 10 23 5 Total Gate Charge, Qg -- nC 1.6 PD -- Ta Mounted on a ceramic board (1000mm2!0.8mm) Drain-to-Source Voltage, VDS -- V IT07091 Allowable Power Dissipation, PD -- W 1.45 1.40 1.2 Allowable Power Dissipation(FET1), PD -- W 1.6 1.4 1.2 1.0 0.8 0.6 0.4 0.2 0 0 0.2 0.4 PD -- PD M ou nte To ta 0.8 do na lD ce 1u iss ram nit ipa ic tio bo n ard (10 00 mm 2 0.4 !0 .8m m) 0 0 20 40 60 80 100 120 140 160 0.6 0.8 1.0 1.2 1.4 1.6 Ambient Temperature, Ta -- C IT07092 Allowable Power Dissipation(FET2), PD -- W IT07093 Note on usage : Since the FTD8004 is a MOSFET product, please avoid using this device in the vicinity of highly charged objects. Specifications of any and all SANYO products described or contained herein stipulate the performance, characteristics, and functions of the described products in the independent state, and are not guarantees of the performance, characteristics, and functions of the described products as mounted in the customer's products or equipment. To verify symptoms and states that cannot be evaluated in an independent device, the customer should always evaluate and test devices mounted in the customer's products or equipment. SANYO Electric Co., Ltd. strives to supply high-quality high-reliability products. However, any and all semiconductor products fail with some probability. It is possible that these probabilistic failures could give rise to accidents or events that could endanger human lives, that could give rise to smoke or fire, or that could cause damage to other property. When designing equipment, adopt safety measures so that these kinds of accidents or events cannot occur. Such measures include but are not limited to protective circuits and error prevention circuits for safe design, redundant design, and structural design. In the event that any or all SANYO products(including technical data,services) described or contained herein are controlled under any of applicable local export control laws and regulations, such products must not be exported without obtaining the export license from the authorities concerned in accordance with the above law. No part of this publication may be reproduced or transmitted in any form or by any means, electronic or mechanical, including photocopying and recording, or any information storage or retrieval system, or otherwise, without the prior written permission of SANYO Electric Co., Ltd. Any and all information described or contained herein are subject to change without notice due to product/technology improvement, etc. When designing equipment, refer to the "Delivery Specification" for the SANYO product that you intend to use. Information (including circuit diagrams and circuit parameters) herein is for example only ; it is not guaranteed for volume production. SANYO believes information herein is accurate and reliable, but no guarantees are made or implied regarding its use or any infringements of intellectual property rights or other rights of third parties. This catalog provides information as of July, 2004. Specifications and information herein are subject to change without notice. PS No.7753-4/4 |
Price & Availability of FTD8004
 |
|
|
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
| [Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
|
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |